Motorized Hydraulic Specimen Extruder Vertical Type
The UTGE-0086 Motorized Hydraulic Specimen Extruder Vertical Type is designed for extruding specimens from 50 mm (2”) to 125 mm (5”) (outer dia.)
Product Code
| UTGE-0086 | Motorized Hydraulic Specimen Extruder Vertical Type, 60 kN Capacity |
Models for 220-240V 50-60 Hz, 1ph | UTGE-0086 |
Models for 110-120V 60 Hz, 1ph | UTGE-0086-N |
Standards
EN 13286-2, 13286-47, 12697-30; AASHTO T134, T180, T193, T245;
ASTM D698, D1557, D1883, D1559; BS 1377-4, 1924-2, 598-107
The UTGE-0086 Motorised Hydraulic Extruder, Vertical Type is designed for extruding specimens from 50 mm (2”) to 125 mm (5”) (outer dia.) shelby sample tubes and moulds such as proctor, CBR and marshall moulds. Also useful for sampling and removing uniaxial and triaxial test specimens to/from the cutters inner dia. from 38 mm to 100 mm.
The Extruder has 60 kN capacity and 650 mm ram travel. The hydraulic piston can be stopped at any position during the extraction.
To remove the sample from the shelby tubes, the adapter sets of different sizes on the table in next page of UTGE-0082 should be ordered separately.
The Motorised Hydraulic Extruder is supplied complete with;
- Adapter sets for Ø100 mm (4”) and Ø150 mm (6”) inner dia. moulds
- Flanges and head sets for Ø38 mm, Ø50 mm, Ø70 mm and 100 mm (only flange) inner dia. cutters.
For UTS-0084 | ||
|---|---|---|
UTGE-0110 | Adaptor Set for 2″ (50,8mm) Outer Dia Shelby Tubes. | Includes a ring with 48,5mm ID. and an extruder head with Ø43,5mm. |
UTGE-0112 | Adaptor Set for 2 ½” (63,5 mm) Outer Dia Shelby Tubes. | Includes a ring with 61mm ID. and an extruder head with Ø56mm. |
UTGE-0114 | Adaptor Set for 3″ (75 mm) Outer Dia Shelby Tubes. | Includes a ring with 72mm ID. and an extruder head with Ø67mm. |
UTGE-0116 | Adaptor Set for 3 1/4″ (83 mm) Outer Dia Shelby Tubes. | Includes a ring with 79,5mm ID. and an extruder head with Ø74,5mm. |
UTGE-0118 | Adaptor Set for 3 1/2″ (88,9 mm) Outer Dia Shelby Tubes. | Includes a ring with 85mm ID. and an extruder head with Ø80mm. |
UTGE-0120 | Adaptor Set for 100 mm Outer Dia Shelby Tubes. | Includes a ring with 96mm ID. and an extruder head with Ø91mm. |
UTGE-0122 | Adaptor Set for Ø4″ (101,6 mm) Outer Dia Shelby Tubes. | Includes a ring with 97,5mm ID. and an extruder head with Ø92,5mm. |
UTGE-0124 | Adaptor Set for 4 1/2″ (114,3 mm) Outer Dia Shelby Tubes. | Includes a ring with 109mm ID. and an extruder head with Ø104mm. |
UTGE-0125 | Adaptor Set for 5″ (125 mm) Outer Dia Shelby Tubes. | Includes a ring with 119mm ID. and an extruder head with Ø114mm. |
Capacity | 60 kN |
|---|---|
Ram Travel | 650 mm |
Dimensions | 550x730x2010 mm |
Weight (approx.) | 190 kg |
Power | 750 W |
